Some people neglect the problem of faucet leakage. And yet, the drops that leaks every second from the faucet could fill a bucket of water in less than a few hours. If you don’t want to see your water bill go up, consider fixing the problem as soon as possible. There are actually some easy and practical solutions that allow you to solve the problem by yourself.

In-depth analysis of the problem

Before attempting anything, make an inventory. You need to know what type of faucet you want to fix and where the leak is. It’s by answering these questions that you will be able to choose the right solution. It’s important to know that the process of repairing a single lever faucet with a single water opening handle is different from that of a single lever faucet that has two wrists. However, the operation in both cases isn’t very difficult, because it usually consists of the set up of a seal or other parts.

Take proper precautions

You must first follow certain safety rules before starting your work. First, it is important to perform a few simple operations such as cutting the water, closing the drain and gently disassembling the different parts of the faucet.

Analyze the mixer nozzle seals

The valve leak is mostly caused by a malfunction in the mixer nozzle. Although there are various seals on a faucet, the problem is often detected on the mixer spout. The solution lies in a few simple gestures. First, you’ll have to unscrew the valve tip before removing the grill and seal. It will be easier for you to check for wear or scale in the equipment.

To remove the tartar, you can use white vinegar and a brush. If you think the seal needs to be replaced, make sure that the replacement model is exactly the same size and has the same characteristics as the old model.

A cartridge problem

For a mixing valve, the problem may come from a damaged cartridge. The cartridge is located below the water opening system. Some faucets don’t have a seal. If this is the case, you will have to set up a new cartridge. To reach the cartridge, simply remove the faucet handle. You can then replace the cartridge and put it back together quickly.

Limestone deposits

Sometimes a limestone deposit causes a faucet leak. In this case, clean the different parts of the material by soaking in white vinegar for a long time. Once done, scrub well to remove any trace of limestone.

If the faucet keeps dripping despite all of these attempts, check the seals for tightness and allow them to sit for a few hours until they can expand in contact with water.

Purchase of a complete kit

If none of these methods work, you can get a full set of faucets and set up a brand new hardware. If you have some hard time to detect the source of the leak, you can always seek the help of a professional.

When you notice a faucet leak, do not wait to contact the number: 905-581-4075. Hamilton City Plumbers will immediately send you an expert to solve the problem.


Call Now Button